Assembler

IROCK Crushers LLC

structural parts into equipment products, with the aid of drawings, schematic drawings, diagrams, layouts, work orders, and oral instructions. This involves reading, understanding, and following a tape measure, work order specifications, blueprints, diagrams, work instructions, oral instructions, and specified procedures.

• Prepare work to be accomplished by studying assembly instructions, blueprint

specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

• Operate or use various hand, power, and air tools including grinders, wrenches,

hammer, cutting torches, drills, punches, and a tape measure. Also operate or use forklifts, and overhead hoists and cranes with associated rigging equipment.

• Use a computer device to access and open/close computer documents.
• Position parts and subassemblies by using reading measurements.
• Assemble components by examining parts and components to ensure correctness and

completeness, examining connections for correct fit, and fastening parts and subassemblies.

• Verify specifications and tolerances to meet product and/or quality specifications by

measuring completed component. Perform work to the utmost of one self’s ability at all times. Continuously strive to improve one self’s work-related skills, efficiency, and the quality of output.

• Complete work tasks as necessary to meet safety, productivity, and quality

specifications. Perform work to the utmost of one self’s ability at all times.

• Adheres to the Shop Floor (SF) process, notifies Supervisor of assembly problems
• Fulfill work requirements according to IROCK quality standards determined for the

assigned work tasks, including incoming and outgoing quality checks, and other quality inspections as required.

• Document actions by completing production, drawing mark-up and quality

forms. 1 5531 Canal Road Tel: (440) 735-4970 Valley View, OH 44125 Fax: (440) 735-4974 irockcrushers.com

• Keep tools and equipment operational by completing preventive maintenance; follow

manufacturer’s instructions; troubleshoot malfunctions; call for repairs, and complete the daily check sheets as determined by the Assembly Superintendent.

• Use Company property with care and respect, help maintain it in good working

condition, and retain it on Company premises.

• Conserve Company resources by using time, equipment, and supplies as needed to

accomplish work tasks.

• Participate in production process and/or product improvement or development

assignments, programs, teams, and focus groups.

• Maintain and use personal protective equipment and other safety supplies and

equipment per OSHA and Company requirements.

• Maintain a safe, organized, and clean working environment.
• Interact with fellow employees, customers, and management in a cooperative,

supportive, and courteous manner; comply with Company policies, procedures, rules, and regulations, and uphold IROCK’s Core Values.

• Perform or assist in other assigned duties as qualified and trained.

SUPERVISORY RESPONSIBILITIES None

required.

• Heavy equipment manufacturing experience desired.
• Computer experience desired, particularly the ability to use a mouse, and locate and

open/close files. General Skills

• Must successfully complete a pre-employment drug screening, physical, and background check,

and random drug and/or alcohol screenings throughout employment.

• Must be dependable, dedicated to completing work assignments correctly, and use time wisely.
• Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new

ideas.

• Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and

supervision, and ability to work with others respectfully and professionally in a team environment. 2 5531 Canal Road Tel: (440) 735-4970 Valley View, OH 44125 Fax: (440) 735-4974 irockcrushers.com

• Ability to communicate clearly and completely, expressing needs, and asking questions.
• Ability to apply commonsense understanding to carry out detailed and written and/or oral

instructions.

• Ability to handle the stress that accompanies production standards and deadlines.
• Ability to accept constructive criticism and make subsequent adjustments, and willingness to

rework incorrect tasks completed by oneself or others.

• Ability to work well with a team in a fast-paced environment

o Takes ownership for team cohesion and team development

• Be a self-starter
• Possess a team spirit with the respect of others’ ideas and requirements
• Must be able to communicate effectively on technical issues

transferring information across departments.

• Ability to write routine reports and correspondence
• Ability to communicate clearly with management and co-workers, both

in person and via email.

• Ability to read and interpret documents

Mathematical Skills

• Ability to add, subtract, multiply and divide in all units of measure, using whole numbers,

common fractions and decimals

• Ability to read, sort, check, count, and verify numbers
• Ability to perform reconciliations, prove results, and detect errors

Reasoning Ability

• Ability to apply common sense understanding to follow instructions furnished in written, oral,

or diagram form

• Ability to work with co-workers, vendors, IROCK visitors, including during urgent/crisis type

issues

• Problem solve using common sense, and according to policies and regulations
• Ability to detect inconsistencies and report information to appropriate personnel

Certificates, Licenses, Registrations

• There are no requirements for this position

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 3 5531 Canal Road Tel: (440) 735-4970 Valley View, OH 44125 Fax: (440) 735-4974 irockcrushers.com While performing the duties of this job, the employee is continually required to talk and hear. The employee frequently is required to communicate and exchange accurate information. The employee frequently is required to walk; stand; sit; use foot/feet; use hand/foot controls; use both hands to finger, handle, feel, grip, or drive; use fine finger ability; use wrist motion; reach above/below shoulders; reach and carry with hands and arms; step up/down, climb or balance; and bend/stoop, twist, squat/crouch, kneel, or crawl. The employee occasionally will work outside the facility, encounter uneven or slippery surfaces, or work in wet conditions. Specific vision abilities include close vision, distant vision, color vision, peripheral vision, depth perception, ability to adjust focus, and hand-eye coordination. Primary work assignment will require employees to frequently push/pull/lift from the floor to the table, and lift from table to shoulder level, up to 75 pounds. Employees may occasionally push/pull/lift below or above shoulder level greater than 75 pounds if they are physically able to do so safely. Employees are encouraged to use caution at all times when pushing/pulling/lifting. Please consider the size, shape, weight of the object to be pushed/pulled/lifted, the path and the distance you must travel along with your own physical ability. If necessary, please seek assistance with pushing/pulling/lifting tasks. Employees should never lift more than they are physically able to handle safely.

• Perform work standing on concrete a minimum of 8 hours and up to 12 hours per day, and a

minimum of 3 days up to 7 days per week.

• Willingness to train/work during hours outside of regularly-scheduled core shift.
• Flexibility to work additional hours beyond and/or consecutively with core work schedule when

needed.

• Willingness to cross-train and perform the work of any job tasks or positions within the

Company as assigned, outside of or in addition to primarily-assigned position, work area, and/or department.

• Willingness to assist with training and mentoring co-workers.
• Regular and reliable attendance for work, appearing on time for each scheduled workday and

working all the scheduled work hours.

• Perform work safely in accordance with all Company safety policies, procedures, and

Personal Protective Equipment (PPE) requirements.

• Perform work in various physical positions including standing, kneeling, squatting, bending,

and reaching (temporary variances may be accommodated based on employee’s primary assignment).

• Perform work in heavy industrial setting with exposure to heat, cold, and humidity, industrial

odors, fumes, gasses, chemicals, oil, grease, smoke, dust, loud noise (hearing protection provided and required), and vibration. Work involves climbing ladders and stairs, movement of heavy objects, using pneumatic tools, working with moving machinery and equipment, working near moving mechanical parts, working in cramped quarters, and working above floor level which could include high, precarious places. There is risk of electrical shock associated with this job.

• Ability to wear the Personal Protective Equipment (PPE) required for this position, including

hearing protection, safety glasses, safety boots with metatarsal guards, and face shield. A respirator may also be required. Fall protection may also be required.

• Ability to operate or use a variety of hand, power, and air tools and devices.

4 5531 Canal Road Tel: (440) 735-4970 Valley View, OH 44125 Fax: (440) 735-4974 irockcrushers.com WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The position functions primarily in a shop/manufacturing/office environment
• Overtime will be necessary during peak times or as needed to meet delivery schedules
• The position requires supervising employees in shop environments, which experiences assembly,

heavy welding, painting fabricating, forming and burning

• The position requires climbing stairs, ladders and equipment for quality, completion and

performance inspections

• Periodic travel to vendors, training and/or job sites as necessary
• The office is attached to the manufacturing facility and occasionally the noise level in the work

environment may be loud o Must have the ability to respond promptly to a facility, project and/or employee injury emergency o While performing the duties of this job, the employee may be exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to high, precarious places; outside weather conditions; and risk of electrical shock. The noise level in the work environment may be loud 5 5531 Canal Road Tel: (440) 735-4970 Valley View, OH 44125 Fax: (440) 735-4974 irockcrushers.com