Saw Machine Operator

Conduct a basic equipment inspection:o Check blade conditiono Verify coolant levelso Ensure guards and safety devices are functioningo Confirm vise/clamps are clean and operational· Put on all required PPE (safety glasses, gloves, steel-toe boots, hearing protection).---2. Reviewing the Work OrdersPull the first scheduled work order for the day. Verify material type, dimensions, thickness, and cut specifications. Check PDF on the tablet. Confirm you have the correct raw material before loading the saw.---3. Machine Setup· Adjust the saw settings based on the job:o Blade speedo Tensiono Angle adjustmentso Vise/clamping adjustments Set the proper length stop or measuring gauge for accurate repeat cuts. Load material securely into the vise, ensuring alignment and safety clearance.---4. Running the First Cut· Begin the first cut slowly and observe:o Blade tracking straighto No unusual vibration or noiseo Coolant flowing properly Complete a first-piece check using calipers, tape measure, or square to confirm accuracy. Compare the first cut to the print/work order. Make adjustments if necessary before continuing production.---5. Running the Production Order Continue cutting material according to the required quantities. Monitor the saw throughout operation:o Blade sharpnesso Straightness of cuto Coolant flowo Clamp pressure and alignment Inspect parts periodically (every few cuts) to ensure they stay within tolerance. Remove completed pieces and place them in the correct staging or rack location. Bundle, tag, or label cut parts as required for traceability.---6. End-of-Shift DutiesClean the machine and remove excess chips/scrap. Check coolant levels and refill if needed. Sweep and organize the surrounding work area. Securely store material and finished parts. Shutdown saw completely.---Required Skills & Qualifications Prior experience using a Hem-Saw or similar horizontal/vertical band saw preferred. Ability to read work orders, prints, and cut lists. Understanding of proper blade selection, speed, and tension. Ability to use measuring tools (tape measure, calipers, square).Strong attention to detail and commitment to accuracy. Ability to lift raw material and finished parts safely.---Physical Requirements Standing for long periods. Lifting up to 50 lbs. regularly. Bending, twisting, pushing, pulling, and repetitive motions. Working in a manufacturing environment with noise, heat, and moving equipment.---Work Environment Fast-paced, production-focused manufacturing setting. Collaboration with supervisors, material handlers, and machine operators. Requires strict adherence to safety protocols.