Collecting information
Organizing data
Live Unload and Drop and Hook - Regional Drivers. TWIC card is preferred in port city locations. Founded in 1928, and headquartered in Memphis, Tennessee, Dunavant gained more than 50 years of experience in logistics and supply chain management as one of the largest global commodities distributors in the world.. In 2010, the company expanded its established logistics model beyond commodities to other industries including the automotive aftermarket, chemical, food and beverage, paper and packaging, and retail.. With solutions within the four main service verticals global, freight, distribution, and consulting - Dunavant provides the knowledge, experience, and technology necessary to ensure supply chain efficiency and effectiveness for its customers.
The service members of the Purchasing, Supply & Logistics community make sure America’s Navy has what it needs, when it needs it.. Officer positions in the Supply Corps are available to college graduates, and Logistics Specialist (LS) positions are available to those without a degree.. Prospective Officers may also receive specialized training in transportation management, freight classifications, methods of working with civilian and other service carriers, and special handling of medicines and explosives.. Enlisted Training Enlisted Sailors pursuing a Logistics Specialist role must first complete the 7–9 week Recruit Training (known as Boot Camp).. Enlisted Qualifications A high-school diploma or equivalent is required to become an Enlisted Sailor in the Logistics Specialist field.
📢 Reports to: VP of Engineering/Quality.. CEL Critical Power has been a trusted leader in mission-critical power distribution solutions for over 40 years, delivering high-performance switchgear, PODs (Power Distribution Units), and control systems to data centres, and pharmaceutical facilities worldwide.. The Quality Control Engineer will report into the VP of Engineering/Quality.. Completion of actions arising from all Audits, NCR’s & Customer Complaints.. CEL has been delivering high-quality, bespoke power distribution solutions for over four decades, with products that stand the test of time.
Join a dynamic, growth-focused publicly traded enterprise as a Cost Accounting Manager, where your financial acumen and strategic insight will directly support executive decision-making and operational excellence.. Oversee inventory valuation for raw materials, WIP, and finished goods in alignment with IFRS and public company reporting rules.. Support internal and external audits, including detailed documentation for SOX compliance audits.. Strong background in public company financial reporting, with working knowledge of SEC and SOX compliance.. Expert-level Excel skills; experience with financial software such as Hyperion or OneStream is a plus.
DSJ Global has partnered with a leader in the Aerospace industry in searching for an Automation Engineer.. This position will be instrumental in identifying new manufacturing technology.. Design and maintain robotic programs for HHC Monoshell/Wax manufacturing.. Experience with Motoman and/or Fanuc robots. Green Belt certification in Six Sigma is preferred.
Emerge is recruiting for a direct hire Manufacturing Automation Engineer in Hampton, VA , for a growing manufacturing company.. We are seeking candidates with hands on experience in robotics programming and automation, preferably with MotoMan or Fanuc Robotics.. Experience with Motoman and/or Fanuc robots.. Understanding of statistical analysis; Six Sigma Green Belt certification preferred.. This position is subject to International Traffic in Arms Regulations (ITAR) , requiring U.S. person status (U.S. Citizen, Permanent Resident, Political Asylee, or Refugee).
Leprino is offering transitioning service members the opportunity to gain hands-on experience in industrial maintenance through our DoD SkillBridge Maintenance Technician Trainee Program.. As a Maintenance Technician Trainee , you’ll be working alongside seasoned maintenance professionals , gaining real-world experience in maintaining and troubleshooting advanced manufacturing equipment.. Conduct vibration analysis and thermal imaging to predict equipment failures.. Navy: Engineman (EN), Machinist’s Mate (MM), Electrician’s Mate (EM), Hull Maintenance Technician (HT), Gas Turbine Systems Technician (GS), Machinery Repairman (MR).. Coast Guard: Machinery Technician (MK), Electronics Technician (ET), Aviation Maintenance Technician (AMT), Electrician’s Mate (EM)
The MSI Express Leadership Rotational Program is a two-year developmental program designed to provide hands-on experience in 3-4 different departments within MSI Express.. This program is designed to provide a well-rounded understanding of food manufacturing, supply chain logistics, financial planning, customer engagement, and human capital management.. Supply Chain – Understand logistics, inventory management, scheduling, and demand planning to optimize product flow and minimize disruptions.. Quality Assurance – Learn about compliance with food safety standards and regulatory guidelines, gaining expertise in FDA, NSF, and SQF requirements and standards.. ✅ No prior work experience required, but internship or co-op experience is a plus
The Director of Operations will oversee both long-term strategic planning and daily operations related to the manufacturing of a segment of the CCM business.. to include PD projects, MDI, 5S, TPM, kaizen and best practice sharing amongst plants.. Collaborate with sales, demand/supply planning, engineering, safety, quality and other cross functional teams to proactively develop companywide manufacturing product and service solutions.. Champion annual efforts to build the Polyurethane and Rubber operating and capital budgets.. Individual will operate primarily in an office setting, with an option to perform job duties in a fully remote capacity, with frequent travel
This is a fully remote role but occasionally, on an as-needed basis, you may be asked to travel for conferences, client visits, or training.. From Manufacturing, Packaging, and Labeling, to Distribution and Technology Vendors, Clinical Supply Consulting partners with teams to optimize efforts, better anticipate resource and expenditure needs and provide in-depth IRT and Clinical Supplies training, support, and planning services.. Interpret relevant protocol information to develop packaging/labeling design and/or global distribution strategy. Work collaboratively with other departments for the creation and approval of product labeling and import/export logistics. Prior experience working with IRT or other software systems related to Clinical Supplies
This opening is with Howmet Aerospace – a world leader in investment casting of super-alloys, aluminum, and titanium primarily for jet aircraft and industrial gas turbine markets.. Job Summary: This position will be instrumental in identifying new manufacturing technology.. Design/maintenance of robotic programs used throughout HHC Monoshell/Wax manufacturing process.. Green Belt certification in Six Sigma is preferred.. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
Manage multiple simultaneous ship modernization projects, each with a project team of shipboard employees, including project managers, production managers, team leads, and support personnel.. Perform cost analyzes on projects pertaining to cost control, cost reduction, inventory control, and production record systems.. Prior experience with the U.S. Navy, U.S. Marine Corps, and/or other relevant military or Government experience is strongly preferred.. Current experience and relationships within the DoD C5ISR sector, NAVWAR, PEO C4I, NIWC Pacific and Atlantic, NAVSEA, NAVAIR and/or U.S. Naval Shipyards strongly preferred.. Experience with DoD C4ISR maintenance, logistics, or business systems preferred, but will consider other relevant industry experience supporting complex solutions as approved by the COR. Individual shall have knowledge of Federal Acquisition Regulation (FAR), DoD procurement policies and procedures, and shall have written and oral communications abilities commensurate with this management role.
This opening is with Howmet Aerospace - a world leader in investment casting of super-alloys, aluminum, and titanium primarily for jet aircraft and industrial gas turbine markets. Job Summary: This position will be instrumental in identifying new manufacturing technology. Design/maintenance of robotic programs used throughout HHC Monoshell/Wax manufacturing process. Green Belt certification in Six Sigma is preferred. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
Operate dual/quad forklift in fast-paced warehousing environment. Knowledge of transport packaging and production-based warehouse environment. Knowledge of 5S lean manufacturing. At least previous warehouse experience in a fast-paced warehousing environment. At least 2 years previous forklift experience in a fast-paced warehousing environment
Responsible for inspection, labeling, packaging and shipping of final products.. Assist in ongoing process improvement and subsequent validation activities.. Adhere to general safety rules, manufacturing procedures, company policies and procedures, ISO and FDA regulations.. Experience working with laboratory chemicals and equipment including pipettes, balances, sealers, and vacuum ovens.. Minimum (2) years working in a manufacturing environment, preferably within the medical device or tissue banking industry
Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. The Manufacturing CNC Programmer primary responsibility is modelling and post processing of Manufacturing Projects requiring advanced High Speed CNC Machining G-Coding utilizing SolidWorks and Mastercam. The Manufacturing CNC Programmer reports directly to the Manufacturing Production Manager for the performance of his/her responsibilities, or in the absence of the Production Manager, an individual designated by the Production Manager. Develop advanced manufacturing production processes for high speed CNC Turning and Machining Center applications. Minimum of five years CAM Systems post editing process programming experience, specifically SolidWorks & Mastercam.
The Quality Control Technician (QCT) is responsible for the oversight of quality assurance related to service request data review and service request completion follow-up within the service request/work order management database (YARDI), as directed by the Facilities Manager/Director. Responsible for 100% review and follow up on all work orders categorized in YARDI software as Life, Health, Safety (LHS).. Review quality of work and inspection of Contractor/Sub contractor work, as coordinated with Facilities Manager/Director.. This may include working closely with Work Order Service Center Coordinator (s) to ensure accurate and complete data input.. Residential Construction, Facility Maintenance, Property Management, Contract Oversight, Home Inspection
Under the direction of the Maintenance Manager, the Maintenance Supervisor will oversee the day-to-day operations of a maintenance department and the supervision of a team responsible for the preventive maintenance and repair of fleet.. Maintain knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on heavy equipment and vehicles used by Company, both on site and on the road. May be exposed to unpleasant sights and smells, such as exhaust fumes, gasoline, diesel fuel, and other dangerous and/or toxic substances or chemicals.. Ability to drive a pickup or heavy truck, equipped with a 5-7 speed manual shift transmission or automatic transmission, climbing in and out of the truck cab. Ability to lift files, open filing cabinets and bend or stand on a step stool as necessary
Develops, analyzes, researches, and designs nondestructive testing (NDT) techniques, procedures, and applications such as phased array ultrasonic testing and computed radiography to improve efficiency and effectiveness of NDT. Prepares technical documentation in order to implement waterfront NDT processes including specifications, analyses, standards, and restrictions.. Uses knowledge of NDT, materials and welding to evaluate non-conforming conditions on the waterfront and at NNS suppliers to determine acceptability of the product.. Welding, mechanical or materials engineering degree with NDT knowledge in all methods. Must be able to interface with NAVSEA, SOS and management. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more.
Enable data driven operational and financial decisions through predictive insights into tool and process performance, including integration of factory data systems and use of software such as MySQL, Python, R, JMP, Minitab, Tableau and Ignition.. Monitor and reduce process variation using techniques such as Statistical Process Control (SPC) and Measurement Systems Analysis (MSA).. TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future.. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more.. Job Segment: Testing, Lean Six Sigma, Six Sigma Black Belt, Manufacturing Engineer, Senior Quality Engineer, Technology, Management, Engineering